The Complete Guide about MK64FN1M0VLQ12 NXP Microcontroller Chip 2023

The MK64FN1M0VLQ12 is a microcontroller chip developed by NXP Semiconductors. It is part of the Kinetis K6x series of microcontrollers and is based on the ARM Cortex-M4 core.

The Overview of MK64FN1M0VLQ12

Members of the MK64FN1M0VLQ12 product family of 120 MHz ARM® Cortex®-M4-based microcontrollers with FPU are optimized for cost-sensitive applications requiring low power consumption, USB/Ethernet connectivity, and up to 256 KB of embedded SRAM. these devices share the full support and scalability of the Kinetis family.

The product offers:

- Operating power consumption as low as 250 μA/MHz. static power consumption as low as 5.8 μA, full state hold and 5 μs wake-up. Lowest quiescent mode down to 339 nA

- USB LS/FS OTG 2.0Vreg with embedded 3.3 V, 120 mA LDO, crystal-less operation with USB devices

- 10/100 Mbit/s Ethernet MAC with interfaces

7 Features of MK64FN1M0VLQ12

• CPU: ARM Cortex-M4 core with a maximum clock speed of 120 MHz
• Memory: 1 MB of flash memory, 256 KB of SRAM, and an external memory interface supporting up to 32 MB of external memory
• Peripherals: Multiple communication interfaces including USB, I2C, SPI, UART, CAN, and Ethernet, as well as a 12-bit analog-to-digital converter (ADC) with up to 27 channels and a DMA controller
• Security: A hardware cryptographic acceleration unit and a secure boot loader to ensure system integrity
• Power management: A variety of low-power modes to minimize power consumption, including a low-leakage stop mode with retention of RAM and system registers
• Operating voltage range: 1.71 V to 3.6 V
• Package: LQFP package with 144 pins.

The Technical Specifications of MK64FN1M0VLQ12

Memory and memory interface

- Up to 1 MB of program flash and 256 KB of RAM

- Up to 128 KB FlexNVM and 4 KB FlexRAM on the device

Uses FlexMemory

- FlexBus external bus interface

System peripheral MK64FN1M0VLQ12

- Multiple low power modes, low leakage wake-up unit

- Memory protection unit with multi-master protection

- 16-channel DMA controller

- External watchdog monitor and software watchdog

Security and integrity module MK64FN1M0VLQ12

- Hardware CRC module

- Hardware random number generator

- Hardware encryption supports DES, 3DES, AES, MD5, SHA-1 and SHA-256.

MD5, SHA-1 and SHA-256 algorithms

- 128-bit unique identification (ID) number per chip

Analog module MK64FN1M0VLQ12

- Two 16-bit SAR ADCs

- Two 12-bit DACs

- Three analog comparators (CMP)

- Voltage reference

Communication interface MK64FN1M0VLQ12

- Ethernet controller with MII and RMII interfaces

- USB full/low speed On-the-Go controller

- Controller Area Network (CAN) Module

- Three SPI modules

- Three I2C modules. Supports up to 1 Mbit/s

- Six UART modules

- Secure Digital Host Controller (SDHC)

- I2S modules

Timer MK64FN1M0VLQ12

- Two 8-channel Flex-Timer (PWM/motor control)

- Two 2-channel FlexTimer (PWM/Quad Decoder)

- IEEE 1588 timer

- 32-bit PIT and 16-bit low-power timer

- Real-time clock

- Programmable delay block

Clock MK64FN1M0VLQ12

- 3 to 32 MHz and 32 kHz crystal oscillators

- PLL, FLL and multiple internal oscillators

- 48 MHz internal reference clock (IRC48M)

Operating Characteristics MK64FN1M0VLQ12

- Voltage range: 1.71 to 3.6 V

- Flash write voltage range: 1.71 to 3.6 V

- Temperature range (ambient): -40 to 105°C

• Product Type: ARM Microcontrollers - MCU
• RoHS: Details
• Mounting Style: SMD/SMT
• Package / Case: LQFP-144
• Core: ARM Cortex M4
• Program memory size: 1 MB
• Data bus width: 32 bit
• ADC resolution: 16 bit
• Maximum clock frequency: 120 MHz
• Number of inputs/outputs: 100 I/O
• Data RAM size: 256 kB
• Operating supply voltage: 1.71 V to 3.6 V
• Minimum operating temperature: - 40 C
• Max. operating temperature: + 105 C
• Package: Tray
• Product: MCU
• Program memory type: Flash
• Trademark: NXP Semiconductors
• Data Ram Type: Flash
• Data Rom Type: EEPROM
• Analog supply voltage: 3.3 V
• I/O Voltage: 3.3 V
• Humidity sensitivity: Yes
• Number of ADC channels: 2 Channel
• Processor Family: ARM
• Product Type: ARM Microcontrollers - MCU
• Factory Pack Quantity: 300
• Sub Category: Microcontrollers - MCUs
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 1.71 V
• Part Number Alias: 935324728557
• Unit Weight: 4.400 g

The Application of MK64FN1M0VLQ12

The MK64FN1M0VLQ12 is a microcontroller from the Kinetis K6x family manufactured by NXP Semiconductors. It is a 32-bit ARM Cortex-M4-based microcontroller with an operating frequency of up to 120 MHz and 1 MB flash memory. Some of the applications of the MK64FN1M0VLQ12 microcontroller are:

Industrial Control Systems: The MK64FN1M0VLQ12 microcontroller is suitable for industrial control systems due to its high processing power and advanced peripherals. It can be used to control various industrial processes such as manufacturing, automation, and monitoring.

Internet of Things (IoT): The MK64FN1M0VLQ12 microcontroller is suitable for IoT applications due to its low power consumption and advanced communication interfaces such as Ethernet, USB, and CAN.

Medical Devices: The MK64FN1M0VLQ12 microcontroller is suitable for medical devices due to its high processing power and advanced features such as secure boot and cryptography. It can be used in medical devices such as patient monitors, infusion pumps, and surgical robots.

Consumer Electronics: The MK64FN1M0VLQ12 microcontroller is suitable for consumer electronics due to its low power consumption, high processing power, and advanced peripherals such as touch sensing and LCD controllers. It can be used in devices such as smartphones, tablets, and smartwatches.

Automotive Systems: The MK64FN1M0VLQ12 microcontroller is suitable for automotive systems due to its high processing power, advanced communication interfaces such as CAN and LIN, and ruggedness. It can be used in automotive applications such as engine control, infotainment systems, and driver assistance systems.

Read more info about application of embedded system here>>

The Advantage and Disadvantages of MK64FN1M0VLQ12

Advantages of MK64FN1M0VLQ12:

High processing power: The MK64FN1M0VLQ12 microcontroller has a 32-bit ARM Cortex-M4 core running at up to 120 MHz, providing high processing power for demanding applications.

Large memory: The MK64FN1M0VLQ12 has 1 MB of flash memory, providing ample space for code and data storage.

Advanced peripherals: The MK64FN1M0VLQ12 includes advanced peripherals such as Ethernet, USB, and CAN interfaces, touch sensing, and LCD controllers, making it suitable for a wide range of applications.

Low power consumption: The MK64FN1M0VLQ12 features low power consumption, making it ideal for battery-powered and energy-efficient applications.

Ruggedness: The MK64FN1M0VLQ12 is designed to operate in harsh environments and withstand temperature extremes, making it suitable for industrial and automotive applications.

Disadvantages of MK64FN1M0VLQ12:

Cost: The MK64FN1M0VLQ12 is a high-performance microcontroller, and its advanced features come at a cost, making it more expensive than some other microcontrollers.

Complexity: The advanced features of the MK64FN1M0VLQ12 also make it a more complex device, requiring more design and development time than simpler microcontrollers.

Limited availability: The MK64FN1M0VLQ12 is not as widely available as some other microcontrollers, making it more challenging to source and integrate into designs.

High power consumption: Although the MK64FN1M0VLQ12 features low power consumption, it may not be as energy-efficient as some other microcontrollers, particularly for low-power applications.

Programming difficulty: The programming of advanced peripherals and high-performance microcontrollers like the MK64FN1M0VLQ12 can be more challenging and require more expertise, making it less accessible for some developers.

Summary

The MK64FN1M0VLQ12 microcontroller is a high-performance and versatile device that offers advanced features such as Ethernet, USB, and CAN interfaces, touch sensing, and LCD controllers.

With a powerful ARM Cortex-M4 core and ample memory, it is suitable for demanding applications in industries such as automotive, industrial automation, and consumer electronics. Despite its advantages, the MK64FN1M0VLQ12 is a complex device that requires more development time and programming expertise than simpler microcontrollers. Additionally, it may be more expensive and less widely available than some other microcontrollers.

Overall, the MK64FN1M0VLQ12 is a valuable choice for applications requiring high performance, advanced features, and ruggedness.