TXB0302DQMR Texas Instruments MCU

TXB0302DQMR Overview

This 2-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 0.9 V to 3.6 V. This allows for low-voltage bidirectional translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V and 3.3-V voltage nodes. For the TXB0302, when the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. The TXB0302 is designed so that the OE input circuit is supplied by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Features

Fully Symmetric Supply Voltages. 0.9 V to 3.6 V on A Port and 0.9 V to 3.6 V
VCC Isolation Feature — If Either VCC Input Is at GND, All Outputs Are in the High-Impedance State
OE Input Circuit Referenced to VCCA
Low Power Consumption, 5-μA Max ICC
Ioff Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- 4000-V Human-Body Model (A114-B)
- 1000-V Charged-Device Model (C101)

Specifications

Circuit Diagram

TXB0302DQMR

SUPPLIERS WHOLESALE PRICE TRENDS

TXB0302DQMR Overview

Features

Specifications

Circuit Diagram

Popular Products

Product evaluation

Popular Searches

Lastest News \\\\\\\\\\\\\\\\

Applications

Download Ranking

Compare products

Products

Events

Privacy