TMS320F28377DZWTT Texas Instruments 32bit MCU

TMS320F28377DZWTT Overview

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The TMS320F2837xD is a powerful 32-bit floating-point microcontroller unit (MCU) designed for advanced closed-loop control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; and sensing and signal processing. To accelerate application development, the DigitalPower software development kit (SDK) for C2000 MCUs and the MotorControl software development kit (SDK) for C2000™ MCUs are available. The F2837xD supports a new dual-core C28x architecture that significantly boosts system performance. The integrated analog and control peripherals also let designers consolidate control architectures and eliminate multiprocessor use in high-end systems.

The dual real-time control subsystems are based on TI’s 32-bit C28x floating-point CPUs, which provide 200 MHz of signal processing performance in each core. The C28x CPUs are further boosted by the new TMU accelerator, which enables fast execution of algorithms with trigonometric operations common in transforms and torque loop calculations; and the VCU accelerator, which reduces the time for complex math operations common in encoded applications.

TMS320F28377DZWTT

The F2837xD microcontroller family features two CLA real-time control coprocessors. The CLA is an independent 32-bit floating-point processor that runs at the same speed as the main CPU. The CLA responds to peripheral triggers and executes code concurrently with the main C28x CPU. This parallel processing capability can effectively double the computational performance of a real-time control system. By using the CLA to service time-critical functions, the main C28x CPU is free to perform other tasks, such as communications and diagnostics. The dual C28x+CLA architecture enables intelligent partitioning between various system tasks. For example, one C28x+CLA core can be used to track speed and position, while the other C28x+CLA core can be used to control torque and current loops.

ECAD Model

Symbol

Footprint

Features

Dual-core architecture

Two TMS320C28x 32-bit CPUs

200 MHz

IEEE 754 single-precision Floating-Point Unit (FPU)

Trigonometric Math Unit (TMU)

Viterbi/Complex Math Unit (VCU-II)

Two programmable Control Law Accelerators (CLAs)

200 MHz

IEEE 754 single-precision floating-point instructions

Executes code independently of main CPU

On-chip memory

512KB (256KW) or 1MB (512KW) of flash (ECC-protected)

172KB (86KW) or 204KB (102KW) of RAM (ECC-protected or parity-protected)

Dual-zone security supporting third-party development

Unique identification number

Clock and system control

Two internal zero-pin 10-MHz oscillators

On-chip crystal oscillator

Windowed watchdog timer module

Missing clock detection circuitry

1.2-V core, 3.3-V I/O design

System peripherals

Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support

Dual 6-channel Direct Memory Access (DMA) controllers

Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering

Expanded Peripheral Interrupt controller (ePIE)

Multiple Low-Power Mode (LPM) support with external wakeup

Communications peripherals

USB 2.0 (MAC + PHY)

Support for 12-pin 3.3 V-compatible Universal Parallel Port (uPP) interface

Two Controller Area Network (CAN) modules (pin-bootable)

Three high-speed (up to 50-MHz) SPI ports (pin-bootable)

Two Multichannel Buffered Serial Ports (McBSPs)

Four Serial Communications Interfaces (SCI/UART) (pin-bootable)

Two I2C interfaces (pin-bootable)

Analog subsystem

Up to four Analog-to-Digital Converters (ADCs)

16-bit mode

1.1 MSPS each (up to 4.4-MSPS system throughput)

Differential inputs

Up to 12 external channels

12-bit mode

3.5 MSPS each (up to 14-MSPS system throughput)

Single-ended inputs

Up to 24 external channels

Single Sample-and-Hold (S/H) on each ADC

Hardware-integrated post-processing of ADC conversions

Saturating offset calibration

Error from setpoint calculation

tms320f28377dzwtt

Temperature options:

T: –40°C to 105°C junction

S: –40°C to 125°C junction

Q: –40°C to 125°C free-air (AEC Q100 qualification for automotive applications)

Specifications

Core Processor C28x
Speed 200MHz
Operating Temperature -40℃ ~ 105℃ (TJ)
Program Memory Type FLASH
RAM Size 102K x 16
Number of I/O 169
Peripherals DMA, POR, PWM, WDT
Mounting Type Surface Mount
Oscillator Type Internal
Supplier Device Package 337-NFBGA (16x16)
Package / Case 337-LFBGA
Core Size 32-Bit Dual-Core
Connectivity CANbus, EBI/EMI, I2C, McBSP, SCI, SPI, uPP, UART/USART, USB
Program Memory Size 1MB (512K x 16)
Data Converters A/D 24x12b, 12x16b; D/A 3x12b
Voltage - Supply (Vcc/Vdd) 1.14V ~ 3.47V

TMS320F28377DZWTT

SUPPLIERS WHOLESALE PRICE TRENDS

TMS320F28377DZWTT Overview

ECAD Model

Features

Specifications

Circuit Diagram

Popular Products

Product evaluation

Popular Searches

Lastest News \\\\\\\\\\\\\\\\

Applications

Download Ranking

Compare products

Products

Events

Privacy