STM32L4R9ZIY6PTR STMicroelectronics 32bit MCU

STM32L4R9ZIY6PTR Overview

The STM32L4R5xx, STM32L4R7xx and STM32L4R9xx devices are an ultra-low-power microcontrollers family (STM32L4+ Series) based on the high-performance Arm® Cortex®-M4 32-bit RISC core. They operate at a frequency of up to 120 MHz.

The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all the Arm® single-precision data-processing instructions and all the data types. The Cortex-M4 core also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) which enhances the application’s security.
These devices embed high-speed memories (2 Mbytes of Flash memory and 640 Kbytes of SRAM), a flexible external memory controller (FSMC) for static memories (for devices with packages of 100 pins and more), two OctoSPI Flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
The STM32L4Rxxx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and a firewall.
These devices offer a fast 12-bit ADC (5 Msps), two comparators, two operational amplifiers, two DAC channels, an internal voltage reference buffer, a low-power RTC, two general-purpose 32-bit timer, two 16-bit PWM timers dedicated to motor control, seven general-purpose 16-bit timers, and two 16-bit low-power timers. The devices support four digital filters for external sigma delta modulators (DFSDM). In addition, up to 24 capacitive sensing channels are available.
They also feature standard and advanced communication interfaces such as: four I2Cs, three SPIs, three USARTs, two UARTs and one low-power UART, two SAIs, one SDMMC, one CAN, one USB OTG full-speed, one camera interface and one DMA2D controller.
The devices operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V for V_DD power supply when using internal LDO regulator and a 1.05 to 1.32 V V_DD12 power supply when using external SMPS supply. A comprehensive set of power-saving modes allows the design of low-power applications.
Some independent power supplies are supported like an analog independent supply input for ADC, DAC, OPAMPs and comparators, a 3.3 V dedicated supply input for USB and up to 14 I/Os, which can be supplied independently down to 1.08 V. A VBAT input allows to backup the RTC and backup the registers. Dedicated V_DD12 power supplies can be used to bypass the internal LDO regulator when connected to an external SMPS.
The STM32L4Rxxx family offers six packages from 100-pin to 169-pin.

ECAD Model

Symbol

Footprint

Features

1.71 V to 3.6 V power supply
-40 °C to 85/125 °C temperature range
Batch acquisition mode (BAM)
305 nA in VBAT mode: supply for RTC and 32x32-bit backup registers
33 nA Shutdown mode (5 wakeup pins)
125 nA Standby mode (5 wakeup pins)
420 nA Standby mode with RTC
2.8 μA Stop 2 with RTC
110 μA/MHz Run mode (LDO mode)
43 μA/MHz Run mode (@ 3.3 V SMPS mode)
5 μs wakeup from Stop mode
Brownout reset (BOR) in all modes except shutdown
Interconnect matrix

Core: Arm 32-bit Cortex-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 120 MHz, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

Performance benckmark

1.25 DMIPS/MHz (Drystone 2.1)
409.20 Coremark (3.41 Coremark/MHz @120 MHz)

Energy benckmark

233 ULPMarkCP score
56.5 ULPMarkPP score

Clock sources

4 to 48 MHz crystal oscillator
32 kHz crystal oscillator for RTC (LSE)
Internal 16 MHz factory-trimmed RC (±1%)
Internal low-power 32 kHz RC (±5%)
Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)
Internal 48 MHz with clock recovery
3 PLLs for system clock, USB, audio, ADC

RTC with HW calendar, alarms and calibration

Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors

Advanced graphics features

Chrom-ART Accelerator (DMA2D) for enhanced graphic content creation
Chrom-GRC (GFXMMU) allowing up to 20% of graphic resources optimization
MIPI DSI Host controller with two DSI lanes running at up to 500 Mbits/s each
LCD-TFT controller

16x timers: 2 x 16-bit advanced motor-control, 2 x 32-bit and 5 x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer

Up to 136 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V

Applications

STM32L4R

Specifications

Core Processor ARM Cortex M4
Speed 120MHz
Operating Temperature -40℃ ~ 85℃ (TA)
Program Memory Type FLASH
RAM Size 640K x 8
Number of I/O 112
Peripherals Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT
Mounting Type Surface Mount
Oscillator Type Internal
Supplier Device Package 144-WLCSP (5.24x5.24)
Package / Case 144-UFBGA, WLCSP
Core Size 32-Bit
Connectivity CANbus, EBI/EMI, I2C, IrDA, LINbus, MMC/SD, SAI, SPI, UART/USART, USB OTG
Program Memory Size 2MB (2M x 8)
Data Converters A/D 16x12b; D/A 2x12b
Voltage - Supply (Vcc/Vdd) 1.71V ~ 3.6V