PIC32MM0064GPM028-I/ML Microchip 32bit MCU

PIC32MM0064GPM028-I/ML Overview

32-bit Microcontrollers - MCU 64KB Flash, 16KB RAM, 79 CoreMark at 25MHz, Low Power microMIPS

microAptiv™ UC 32-Bit Core with 5-Stage Pipeline
microMIPS™ Instruction Set for 35% Smaller Code and 98% Performance compared to MIPS32 Instructions
Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency
16-Bit/32-Bit Wide Instructions with 32-Bit Wide Data Path
Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency
Single-Cycle 32x16 Multiply and Two-Cycle 32x32 Multiply
Hardware Divide Unit
64-Bit, Zero Wait State Flash with ECC to Maximize Endurance/Retention

Low pin count packages, ranging from 28 to 64 pins, including UQFN as small as 4x4 mm
Up to 64K ECC Flash Memory
Up to 16K Data Memory
Fail-Safe Clock Monitor mode
Programmable Code Protection
Configurable Watchdog Timer with On-Chip, Low-Power RC Oscillator

Three Analog Comparators with Input Multiplexing
Programmable High/Low-Voltage Detect (HLVD)
5-Bit DAC with Pin Output
Auto-scan feature
Up to 24-Channel, Software-Selectable 10/12-Bit SAR Analog-to-Digital Converter (ADC):
12-bit, 200K samples/second conversion rate (single Sample-and-Hold)
10-bit, 300K samples/second conversion rate (single Sample-and-Hold)

USB 2.0 Compliant Full-Speed and Low-Speed Device, Host and On-The-Go (OTG)Controller with a dedicated DMA
USB Device mode operation from FRC oscillator with no external crystal oscillator required
4-Channel Hardware DMA with Automatic Data Size Detection and CRC Engine
Three 4-Wire SPI modules (up to 25 Mbps)
Three I2C Master and Slave w/Address Masking and IPMI Support
Three Enhanced Addressable UARTs:
RS-232, RS-485 and LIN/J2602 support
IrDA® with on-chip hardware encoder and decoder
Hardware Real-Time Clock and Calendar (RTCC)
Up to 24 Peripheral Pin Select (PPS) Remappable Pins
21 Total 16-Bit Timers
Timers: Three dedicated 16-bit timers/counters
Timers: Two can be concatenated to form a 32-bit timer
Timers: Two additional 16-bit timers in each MCCP and SCCP module, totaling 18
Capture/Compare/PWM/Timer modules with PWM resolution down to 21 ns
One Multiple Output (MCCP) module:
MCCP: Flexible configuration as PWM, input capture, output compare or timers
MCCP: Six PWM outputs
MCCP: Programmable dead time
MCCP: Auto-shutdown
Six Single Output (SCCP) modules:
SCCP: Flexible configuration as PWM, input capture, output compare or timers
SCCP: Single PWM output
Four Configurable Logic Cells (CLC) with Internal Connections to Select Peripherals and PPS