PIC24HJ32GP202T-I/MM Microchip 16bit MCU

PIC24HJ32GP202T-I/MM Overview

The PIC24H 16-bit device family employs a powerful 16-bitarchitecture, ideal for applications that rely on high-speed, repetitivecomputations, as well as control. The devices are pin compatible with thedsPIC33F family of devices, and share a very high degree of compatibility withthe dsPIC30F family devices. This allows seamless migration options from/toPIC24F, dsPIC30F and dsPIC33F devices.

Features

Operating Conditions

Up to 40 MIPS operation
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS

High Efficiency PIC24H core

Code-efficient (C and Assembly) architecture
Single-cycle mixed-sign MUL plus hardware divide
16-bit wide data path, 24-bit wide instructions
Linear program memory addressing up to 4M instruction words
Linear data memory addressing up to 64 Kbytes

Clock Management

2% internal oscillator
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast wake-up and start-up

Power Management

Low-power management modes (Sleep, Idle, Doze)
Integrated Power-on Reset and Brown-out Reset
1.35 mA/MHz dynamic current (typical)
55 μA IPD current (typical)

Advanced Analog Features

ADC module: - Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 Ksps with one S&H - Ten analog inputs on 28-pin devices and up to 13 analog inputs on 44-pin devices
Flexible and independent ADC trigger sources

Timers/Output Compare/Input Capture

Three 16-bit timers/counters. Can pair up two to make one 32-bit
Two Output Capture modules configurable as timers/counters
Four Input Capture modules
Peripheral Pin Select (PPS) to allow function remap

Communication Interfaces

One UART module (10 Mbps) - With support for LIN 2.0 protocols and IrDA®
One 4-wire SPI module (15 Mbps)
One I2C™ module (up to 1 Mbaud) with SM Bus support
PPS to allow function remap

Input/Output

Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for non-standard VOH1
5V-tolerant pins
Selectable open drain, pull-ups, and pull-downs
Up to 5 mA overvoltage clamp current
External interrupts on all I/O pins