P5020NXE7QMB NXP MPU

P5020NXE7QMB Overview

The dual-core P5020 and single-core P5010 processors deliver 64-bit processing, based on the e5500 core built on Power Architecture® technology. With frequencies scalable to 2.0 GHz, large caches and high per-cycle efficiency, these products target control plane and computer applications that require high single-threaded performance.

The P5 platform leverages architectural features pioneered in the P4 platform, including the three-level cache hierarchy for low latencies, hardware hypervisor for robust virtualization support, data path acceleration architecture (DPAA) for offloading packet handling tasks from the core and the CoreNet® switch fabric that eliminates internal bottlenecks. This enables architectural compatibility from the P5 platform to the P4 platform as well as to the P3 platform.

Features

Single or dual 64-bit e5500 cores offered at 2.0 GHz
Three level cache-hierarchy: 32 KB I/D L1; 512 KB private L2 per core; 2 MB shared L3
Up to 2.0 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
Three levels of instruction: user, supervisor, hypervisor
Hybrid 32-bit mode to support legacy software and transition to 64-bit architecture
2.0 MB configures as dual 1 MB platform cache

Networking Elements

SerDes
- 18 lanes at up to 5 Gbps
- Supports SGMII, Serial RapidIO®, XAUI, PCI Express® (PCIe) rev1.1/2.0, SATA
Ethernet interfaces
- 10 Gbps Ethernet MAC
- Five 1 Gbps Ethernet MACs

Accelerators and memory control

Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support
- Up to 1300MT/s
Frame manager for packet handling
Queue manager for policing, scheduling and workload distribution
Security block for crypto algorithm acceleration
RAID5/6 for parity calculations in storage applications
RapidIO message manager for type 9 and 11 messaging
Pattern matching engine for regular expression searches

Basic Peripherals and Interconnect

Up to four PCIe 2.0/3.0 controllers
Two serial ATA (SATA 2.0) controllers
Two USB 2.0 controllers with integrated PHY
Enhanced secure digital host controller (SD/MMC/eMMC)
Two I²C controllers
Two DUARTs

Additional Features

Hardware hypervisor for safe partitioning of operating systems between cores
Trusted boot capability to ensure only the correct code is booted and that code is not reverse-engineered
This product is included in NXP®'s product longevity program, with assured supply for a minimum of 10 years after launch

Applications

QorIQ P5

Specifications

Core Processor PowerPC e5500
Speed 2.0GHz
Operating Temperature -40℃ ~ 105℃ (TA)
Security Features Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection
USB USB 2.0 + PHY (2)
Supplier Device Package 1295-FCPBGA (37.5x37.5)
Package / Case 1295-BBGA, FCBGA
Number of Cores/Bus Width 2 Core, 64-Bit
Ethernet 1Gbps (5), 10Gbps (1)
RAM Controllers DDR3, DDR3L
Graphics Acceleration No
SATA SATA 3Gbps (2)
Co-Processors/DSP Security; SEC 4.2