P1010NXN5DFB NXP MPU

P1010NXN5DFB Overview

The QorIQ® P1010 and P1014 communications processors expand QorIQ performance into cost- and power-sensitive applications. Based on 45 nm technology, the processors provide performance up to 1000 MHz and power dissipation as low as 1.1 watts, along with extensive integration and a rich set of interfaces that target cost-sensitive endpoint applications such as:

IP Camera
Industrial Robot
Wireless LAN (WLAN) Access Point
Network Attached Storage
Printing and Imaging
Router

Features

Single e500 core, built on Power Architecture® technology
32 KB of L1 instruction cache and 32 KB of L1 data cache
400 to 1000 MHz core clock frequency
256 KB L2 cache with ECC, also configurable as SRAM and stashing memory

NETWORKING ELEMENTS

SerDes
- 6 lanes at up to 3.125 GHz
- Supports SGMII, PCI Express® (PCIe) and SATA

ACCELERATORS AND MEMORY CONTROL

16-/32-bit DDR3 SDRAM memory controller with ECC support
Hardware-based cryptography acceleration (SEC4.0)
Up to three Gigabit Ethernet interfaces with support for IEEE® 1588
- TCP/IP acceleration, quality of service and classification capabilities
- Support for RGMII and SGMII

BASIC PERIPHERALS AND INTERCONNECT

1 x USB controller (USB 2.0) with integrated PHY, OTG and device support
2x Serial ATA (SATA2.0) controllers
Serial peripheral interface (SPI)
Trusted boot platform, integrated security
Four-channel DMA controller
2 x I²C controllers, 2 x DUARTs, timers
Integrated flash controller (IFC) with enhanced capabilities to support large pages
2x PCIe controllers
2x FlexCAN interfaces to support industrial protocols

ADDITIONAL FEATURES