MPC8540PX833LB NXP MPU

MPC8540PX833LB Overview

Addressing the needs for higher compute density and lower system cost, Our MPC8540 integrated host processor is designed to provide the highest level of performance and integration available today. The MPC8540 is Our first device utilizing the e500 core, is the industry's first RapidIO®-enabled processor, and provides dual gigabit ethernet controllers. Balancing processor performance with I/O system throughput, the MPC8540 is a powerful control element for network routers and switches, storage subsystems, network appliances, and print and imaging devices.

Access to the errata document for this device requires an NDA. Contact your local NXP Sales Office or NXP Authorized Distributor.

Features

Embedded e500 compatible core available from 600 MHz up to 1 GHz
32-bit, dual-issue, superscalar, seven-stage pipeline
1850 MIPS at 800 MHz (est. Dhrystone 2.1)
32 KB L1 data and 32 KB L1 instruction cache with line locking support
256 KB on-chip L2 cache with direct mapped capability
Enhanced hardware and software debug support
Memory management unit (MMU)
SIMD extension with single precision floating point

Two triple-speed Ethernet controllers (TSECs) supporting 10/100/1000 Mbps Ethernet (IEEE® 802.3, 802.3u, 802.3x, 802.3z, and 802.3ac compliant) with two GMII/TBI/RGMII interfaces
166 MHz, 64-bit, 2.5-volt I/O, DDR SDRAM memory controller with full ECC support
500 MHz, 8-bit, LVDS I/O, RapidIO controller
133 MHz, 64-bit, 3.3-volt I/O, PCI-X 1.0a/PCI 2.2 bus controller
166 MHz, 32-bit, 3.3-volt I/O, local bus with memory controller
10/100 Ethernet controller (802.3) for chip debug and maintenance support
Integrated four-channel DMA controller
Interrupt controller
IEEE 1149.1 JTAG test access port
1.2-volt core power supply with 3.3-volt and 2.5-volt I/O
783-pin FC-BGA package
This product is included in NXP®.s product longevity program, with assured supply for a minimum of 10 years after launch