CC430F5137IRGZR TI RF Microcontrollers MCU

CC430F5137IRGZR Overview

The TI CC430 family of ultra-low-power system-on-chip (SoC) microcontrollers withintegrated RF transceiver cores consists of several devices that feature different sets ofperipherals targeted for a wide range of applications. The architecture, combined with fivelow-power modes, is optimized to achieve extended battery life in portable measurementapplications. The devices feature the powerful MSP430 16?bit RISC CPU, 16-bit registers, andconstant generators that contribute to maximum code efficiency.

The CC430 family provides a tight integration between the microcontroller core, itsperipherals, software, and the RF transceiver, making these true SoC solutions easy to use as wellas improving performance.

The CC430F61xx series are microcontroller SoC configurations that combine the excellentperformance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, ahigh-performance 12-bit ADC with eight external inputs plus internal temperature and batterysensors on CC430F613x devices, a comparator, USCIs, a 128-bit AES security accelerator, a hardwaremultiplier, a DMA, an RTC module with alarm capabilities, an LCD driver, and up to 44 I/Opins.

The CC430F513x series are microcontroller SoC configurations that combine the excellentperformance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, ahigh-performance 12-bit ADC with six external inputs plus internal temperature and battery sensors,a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, a DMA, an RTCmodule with alarm capabilities, and up to 30 I/O pins.

For complete module descriptions, see the CC430 Family User’s Guide.

ECAD Model

Footprint

Features

True System-on-Chip (SoC) for Low-Power Wireless CommunicationApplications
Wide Supply Voltage Range:
3.6 V Down to 1.8 V
Ultra-Low Power Consumption
- CPU Active Mode (AM): 160 μA/MHz
- Standby Mode (LPM3 RTC Mode): 2.0 μA
- Off Mode (LPM4 RAM Retention): 1.0 μA
- Radio in RX: 15 mA, 250 kbps, 915 MHz
MSP430 System and Peripherals
- 16-Bit RISC Architecture, Extended Memory, up to 20-MHz SystemClock
- Wake up From Standby Mode in Less Than 6 μs
- Flexible Power-Management System With SVS and Brownout
- Unified Clock System With FLL
- 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
- 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
- Hardware Real-Time Clock (RTC)
- Two Universal Serial Communication Interfaces (USCIs)
  - USCI_A0 Supports UART, IrDA, SPI
  - USCI_B0 Supports I2C, SPI
- 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference,Sample-and-Hold, and Autoscan Features (CC430F613x and CC430F513x Only)
- Comparator
- Integrated LCD Driver With Contrast Control for up to 96 Segments (OnlyCC430F61xx)
- 128-Bit AES Security Encryption and Decryption Coprocessor
- 32-Bit Hardware Multiplier
- 3-Channel Internal DMA
- Serial Onboard Programming, No External Programming Voltage Needed
- Embedded Emulation Module (EEM)
High-Performance Sub-1 GHz RF Transceiver Core
- Same as in CC1101
- Wide Supply Voltage Range: 2 V to 3.6 V
- Frequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to928 MHz
- Programmable Data Rate From 0.6 kBaud to 500 kBaud
- High Sensitivity (–117 dBm at 0.6 kBaud, –111 dBmat 1.2 kBaud, 315 MHz, 1% Packet Error Rate)
- Excellent Receiver Selectivity and Blocking Performance
- Programmable Output Power up to +12 dBm for All SupportedFrequencies
- 2-FSK, 2-GFSK, and MSK Supported, Also OOK and Flexible ASKShaping
- Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync WordDetection, Address Check, Flexible Packet Length, and Automatic CRC Handling
- Support for Automatic Clear Channel Assessment (CCA) Before Transmitting (forListen-Before-Talk Systems)
- Digital RSSI Output
- Suited for Systems Targeting Compliance With EN 300 220 (Europe) andFCC CFR Part 15 (US)
- Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN137574:2005
- Support for Asynchronous and Synchronous Serial Receive or Transmit Mode forBackward Compatibility With Existing Radio Communication Protocols
Device Comparison Summarizesthe Available Family Members