ATMEGA8L-8AU Microchip 8bit MCU

ATMEGA8L-8AU Overview

AVR AVR® ATmega Microcontroller IC 8-Bit 8MHz 8KB (4K x 16) FLASH 32-TQFP (7x7)

ECAD Model

Symbol

Footprint

Features

Features:

Current Capacity: Size 16, 13A (max)

Wire Range: Size 16 contacts will accept wire ranges of 14 thru 20AWG

Temperature: Operating temperature range: -55°C to +125°C at rated current

Dielectric Value: Meets or exceeds 1500 volts minimum

Drop Test: Shall not become detached or loosened when placed at 750mm and dropped to concreteeight times

Shock: No latch disengagement or discontinuity shall be the result when subjected to 50 g’s ineach of three axis (X, Y & Z)

Vibration: Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)

Connector Terminal Retention: When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.

Connector Retention: A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds

Thermal Shock: Subjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damagedetrimental to the normal operation of the connector

Insulation Resistance: 1000 megaohm minimum at 25°C

Mating Cycle Durability: Following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident

Contact Millivolt Drop: Size 16 contacts with 16AWG conductor - 100 mV drop max at 13A test current

Water Immersion: A mated connection, properly wired, placed in an oven at +125°C for 1 hour, thenplaced immediately in a depth of water of 1 meter for 4 hours without loss of electronicperformance