ADUCM350BBCZ-RL Analog Devices 32bit MCU

ADUCM350BBCZ-RL Overview

The ADuCM350 is a configurable Impedance Converter and Potentiostat with current and voltage measurement capability for both Electrochemical sensors and Biosensors. It is a complete, coin cell powered, high precision, MCU integrated solution for portable device applications such as point-of-care diagnostics and body-worn devices for monitoring vital signs.

The ADuCM350 analog front end (AFE) features a 16-bit, precision, 160 kSPS analog-to-digital converter (ADC); 0.17% precision voltage reference; 12-bit, no missing codes digital-to-analog converter (DAC); and a reconfigurable ultralow leakage switch matrix. It has 4 voltage measurement channels, up to 8 current measurement channels and an impedance measurement DFT engine. The ADuCM350 also includes an ARM Cortex-M3-based processor, memory, and all I/O connectivity to support portable meters with display, USB communication, and active sensors. The ADuCM350 is available in a 120-lead, 8 mm × 8 mm CSP_BGA and operates from −40°C to +85°C.

To support extremely low dynamic and hibernate power management, the ADuCM350 provides a collection of power modes and features, such as dynamic and software controlled clock gating and power gating.The AFE is connected to the ARM Cortex-M3 via an advanced high performance bus (AHPB) slave interface on the advanced microcontroller bus architecture (AMBA) matrix, as well as direct memory access (DMA) and interrupt connections.

Applications

Point-of-care diagnostics
Body-worn devices for monitoring vital signs
Amperometric, voltametric, and impedometric measurements

Features

Measurement capabilityImpedance measurementsCurrent measurements Amperometry VoltammetryVoltage measurements Potentiometry
Analog performance160 kSPS, 16-bit, precision analog-to-digital converter (ADC) High precision voltage referenceUltra Low Leakage Configurable Switch Matrix12-bit digital-to-analog converter (DAC)
Analog hardware acceleratorsAutonomous analog front-end (AFE) controller Direct digital synthesizer (DDS)/arbitrary waveform generatorReceive filtersComplex impedance measurement (DFT) engine
Processing16 MHz ARM® Cortex M3 processor384 kB of embedded flash memory32 kB system SRAM16 kB Flash configured EEPROM
CommunicationInput/outputI2S and beeper interfaceLCD display controller (parallel and serial)LCD segment controller SPI, I2C, USB, and UART peripheral interfacesProgrammable GPIOs
PowerCoin cell battery compatible2.0 V to 3.6 V hibernate operation2.5 V to 3.6 V active measurement rangePower management unit (PMU)Power-on reset (POR) and power supply monitor (PSM)
Packages and temperature rangeOperating temperature range: −40°C to +85°CPackage: 120-lead, 8 mm × 8 mm CSP_BGA
See datasheet for additional features