TCAN1042HGVDR Texas Instruments MCU

TCAN1042HGVDR Overview

This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller AreaNetwork) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps(megabits per second). Devices with part numbers that include the "G" suffix are designed for datarates up to 5 Mbps, and versions with the "V" have a secondary power supply input for I/O levelshifting the input pin thresholds and RXD output level. This family has a low power standby mode with remote wakerequest feature. Additionally, all devicesinclude many protection features to enhance device and network robustness.

Features

Meets the ISO 11898-2:2016 and ISO 11898-5:2007 Physical Layer Standards
’Turbo’CAN:
- All Devices Support Classic CAN and 2 Mbps CAN FD (Flexible DataRate) and "G" Options Support 5 Mbps
- Short and Symmetrical Propagation Delay Times and Fast LoopTimes for Enhanced Timing Margin
- Higher Data Rates in Loaded CANNetworks
I/O Voltage Range Supports 3.3 V and 5 VMCUs
Ideal Passive Behavior When Unpowered
- Bus and LogicTerminals are High Impedance (no load)
- Power Up/Down With Glitch Free OperationOn Bus and RXD Output
Protection
- HBM ESD Protection: ±16kV
- IEC ESD Protection up to ±15 kV
- Bus Fault Protection:±58 V (non-H variants) and ±70 V (H variants)
- Undervoltage Protection on VCC andVIO (V variants only) Supply Terminals
- Driver DominantTime Out (TXD DTO) - Data rates down to 10 kbps
- Thermal Shutdown Protection(TSD)
Receiver Common Mode Input Voltage: ±30V
Typical Loop Delay: 110 ns
Junction Temperatures from–55°C to 150°C
Available in SOIC(8) Package and Leadless VSON(8) Package (3.0mm x 3.0 mm) with Improved Automated Optical Inspection (AOI) Capability