STM32F410TBY7TR STMicroelectronics 32bit MCU

STM32F410TBY7TR Overview

The STM32F410x8/B devices are based on the high-performance ARM®Cortex? -M4 32-bit RISC core operating at a frequency of up to 100 MHz. Their Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32F410x8/B belong to the STM32 Dynamic Efficiency? product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.
The STM32F410x8/B incorporate high-speed embedded memories (up to 128 Kbytes of Flash memory, 32 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, one AHB bus and a 32-bit multi-AHB bus matrix.
All devices offer one 12-bit ADC, one 12-bit DAC, a low-power RTC, three general-purpose 16-bit timers, one PWM timer for motor control, one general-purpose 32-bit timers and one 16-bit low-power timer. They also feature standard and advanced communication interfaces.

ECAD Model

Symbol

Footprint

Features

Up to 128 Kbytes of Flash memory
512 bytes of OTP memory
32 Kbytes of SRAM

Clock, reset and supply management

1.7 V to 3.6 V application supply and I/Os
POR, PDR, PVD and BOR
4-to-26 MHz crystal oscillator
Internal 16 MHz factory-trimmed RC
32 kHz oscillator for RTC with calibration
Internal 32 kHz RC with calibration

Power consumption

Run: 89 μA/MHz (peripheral off)
Stop (Flash in Stop mode, fast wakeup time): 40 μA Typ @ 25 °C; 49 μA max @25 °C
Stop (Flash in Deep power down mode, fast wakeup time): down to 6 μA @ 25 °C; 14 μA max @25 °C
Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V
V_BATsupply for RTC: 1 μA @25 °C

1×12-bit, 2.4 MSPS ADC: up to 16 channels

1×12-bit D/A converter

General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support

Up to 9 timers

One 16-bit advanced motor-control timer
One low-power timer (available in Stop mode)
Three 16-bit general purpose timers
One 32-bit timer up to 100 MHz with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
Two watchdog timers (independent window)
SysTick timer.