PIC24FJ1024GB610T-I/PT Microchip 16bit MCU

PIC24FJ1024GB610T-I/PT Overview

The eXtreme lowpower, PIC24F MCU includes up to 1MB of Flash memory with Error Correction Code(ECC) ,32 KB of RAM and USB connectivity. This device also featuresdual-partition Flash with Live Update capability, enabling them to hold twoindependent software applications, permitting simultaneous programming of onepartition while executing application code from the other. With the ability toperform over-the-air firmware updates, designers can provide a cost-effective,reliable and secure method for updating their applications. These MCUs alsofeature eXtreme low power modes with current consumptions as low as 300nA insleep modes.This powerfulcombination of features makes the PIC24F “GA6” family ideal for industrial,computer, medical/fitness and portable applications that require a long batterylife, and data transfer and storage without the need of external memory, suchas electricity metering, HVAC control, fingerprint scanners and gaming.

Features

Modified Harvard Architecture
Up to 16 MIPS Operation @ 32 MHz
8 MHz Internal Oscillator:
96 MHz PLL option
Multiple clock divide options
Run-time self-calibration capability for maintaining better than ±0.20% accuracy
Fast start-up
17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
32-Bit by 16-Bit Hardware Divider
16 x 16-Bit Working Register Array
C Compiler Optimized Instruction Set Architecture
Two Address Generation Units for Separate Read and Write Addressing of Data Memory

Live Update

Dual Partition Flash with Live Update Capability
Capable of Holding Two Independent Software Applications, including Bootloader
Permits Simultaneous Programming of One Partition while Executing Application Code from the Other
Allows Run-Time Switching Between Active Partitions

Low-Power Features

Sleep and Idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up
Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals
Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction

Universal Serial Bus (USB) Features

USB v2.0 On-The-Go (OTG) Compliant
USB Device mode Operation from FRC Oscillator – No Crystal Oscillator Required
Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
Supports up to 32 Endpoints (16 bidirectional)
Supports Control, Interrupt, Isochronous and Bulk Transfers
On-Chip Pull-up and Pull-Down Resistors

Analog Features

10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter:
12-bit conversion rate of 200 ksps
Auto-scan and threshold compare features
Conversion available during Sleep
Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
Charge Time Measurement Unit (CTMU):
Used for capacitive touch sensing, up to 24 channels
Time measurement down to 100 ps resolution