MPC8533EVTANG NXP MPU

MPC8533EVTANG Overview

The MPC8533E PowerQUICC® III communications processor offers high level of integration and performance for Ethernet-only or PCIe interworking applications, such as enterprise networking and advanced multi-function printer (MFP) and imaging applications.

Includes enhanced peripherals, an integrated security engine, and a wide range of high-speed connectivity options
Supports complex, computationally demanding control plane processing tasks
Comes optimized for power sensitive applications
Provides a flexible SoC platform to accelerate time-to-market
Simplifies board design

Access to the errata document for this device requires an NDA. Contact your local NXP® Sales Office or NXP Authorized Distributor.

Features

Embedded e500 core, initial offerings up to 667 MHz, targeting up to 1.0 GHz
- Dual dispatch superscalar, 7-stage pipeline design with out-of-order issue and execution
- 2,240 MIPS at 1.0 GHz (estimated Dhrystone 2.1)
- 36-bit physical addressing

Enhanced hardware and software debug support
Double-precision embedded scalar and vector floating-point APUs
Memory management unit (MMU)
Double-precision embedded scalar and vector floating-point APUs
Integrated L1/L2 cache
- L1 cache—32 KB data and 32 KB instruction cache with line-locking support
- L2 cache—256 KB (8-way set associative); 256/128/64/32 KB can be used as SRAM
- L1 and L2 hardware coherency
- L2 cache and I/O transactions can be stashed into L2 cache regions
Integrated DDR memory controller with full ECC support, offering:
- 200 MHz clock rate (400 MHz data rate), 64-bit, 2.5V/2.6V I/O, DDR SDRAM
- 267 MHz clock rate (up to 533 MHz data rate), 64-bit, 1.8V I/O, DDR2 SDRAM
Integrated security engine supporting DES, 3DES, MD-5, SHA-1/2, AES, RSA, RNG, Kasumi F8/F9 and ARC-4 encryption algorithms
Two on-chip Three Speed Ethernet controllers (ETSECs) supporting 10 Mbps, 100 Mbps and 1 Gbps Ethernet/IEEE® 802.3 networks with MII, RMII, RGMII, and RTBI physical interfaces:
- TCP/UDP/IP checksum acceleration
- Advanced QoS features
General-purpose input/output (GPIO)
PCI Express high-speed interconnect interfaces, supporting combinations of dual x4 and single x1 PCI Express
On-chip network (OCeaN) switch fabric
PCI interface support
- 32-bit PCI 2.2 bus controller (up to 66MHz, 3.3V I/O)
Local bus
- 166 MHz, 32-bit, 3.3V I/O, local bus with memory controller
Integrated four-channel DMA controller
- Multiplexed 32-bit address and data operating up to 133 MHz
- 32-, 16- and 8-bit port sizes controlled by on-chip memory controller
Dual I²C and DUART support
Dual I²C interfaces (master or slave mode)
Programmable interrupt controller (PIC)
IEEE 1149.1 JTAG test access port
1.0V core voltage with 3.3V and 2.5V I/O
783-pin FC-BGA package