Hello! Welcome to Embedic!
This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
Home > Embedded ICs > 32bit MCU > LPC1833JET100E
NXP

LPC1833JET100E

Pictures are for reference only Please prevail in kind

  • Quantity : *

  • Contact Name : *

  • Email : *

price SUPPLIERS WHOLESALE PRICE TRENDS

Price comparison from authorized distributors

price info LPC1833JET100E Competitive Prices

EmbedIC has the unique source of supply. We can offer LPC1833JET100E more competitive price for our customers. You can enjoy our best service by purchasing NXP LPC1833JET100E, Please feel free to contact for the best price of LPC1833JET100E 32bit MCU. Click To Get Quotation

LPC1833JET100E Overview

The LPC185x/3x/2x/1x are Arm Cortex-M3 based microcontrollers for embeddedapplications. The Arm Cortex-M3 is a next generation core that offers systemenhancements such as low power consumption, enhanced debug features, and a highlevel of support block integration.

The LPC185x/3x/2x/1x operate at CPU frequencies of up to 180 MHz. The ArmCortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture withseparate local instruction and data buses as well as a third bus for peripherals. The ArmCortex-M3 CPU also includes an internal prefetch unit that supports speculativebranching.

The LPC185x/3x/2x/1x include up to 1 MB of flash and 136 kB of on-chip SRAM, 16 kB ofEEPROM memory, a quad SPI Flash Interface (SPIFI), a State Configurable Timer (SCT)subsystem, two High-speed USB controllers, Ethernet, LCD, an external memorycontroller, and multiple digital and analog peripherals.

Features

  • Processor core
    • Arm Cortex-M3 processor, running at CPU frequencies of up to 180 MHz
    • Arm Cortex-M3 built-in Memory Protection Unit (MPU) supporting eight regions
    • Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
    • Non-maskable Interrupt (NMI) input
    • JTAG and Serial Wire Debug, serial trace, eight breakpoints, and four watch points
    • Enhanced Trace Module (ETM) and Enhanced Trace Buffer (ETB) support
    • System tick timer
  • On-chip memory
    • Up to 1 MB on-chip dual bank flash memory with flash accelerator
    • 16 kB on-chip EEPROM data memory
    • 136 kB SRAM for code and data use
    • Multiple SRAM blocks with separate bus access
    • 64 kB ROM containing boot code and on-chip software drivers
    • 64 bit of One-Time Programmable (OTP) memory for general-purpose use
  • Clock generation unit
    • Crystal oscillator with an operating range of 1 MHz to 25 MHz
    • 12 MHz internal RC oscillator trimmed to 2 % accuracy over temperature andvoltage (1 % accuracy for Tamb = 0 °C to 85 °C)
    • Ultra-low power RTC crystal oscillator
    • Three PLLs allow CPU operation up to the maximum CPU rate without the need fora high-frequency crystal. The second PLL can be used with the High-speed USB,the third PLL can be used as audio PLL
    • Clock output
  • Configurable digital peripherals
    • State Configurable Timer (SCT) subsystem on AHB
    • Global Input Multiplexer Array (GIMA) allows to cross-connect multiple inputs andoutputs to event driven peripherals like timers, SCT, and ADC0/1
  • Serial interfaces
    • Quad SPI Flash Interface (SPIFI) with 1-, 2-, or 4-bit data at rates of up to52 MB per second
    • 10/100T Ethernet MAC with RMII and MII interfaces and DMA support for highthroughput at low CPU load. Support for IEEE 1588 time stamping/advanced timestamping (IEEE 1588-2008 v2)
    • One High-speed USB 2.0 Host/Device/OTG interface with DMA support andon-chip high-speed PHY (USB0)
    • One High-speed USB 2.0 Host/Device interface with DMA support, on-chipfull-speed PHY and ULPI interface to an external high-speed PHY (USB1)
    • USB interface electrical test software included in ROM USB stack
    • Four 550 UARTs with DMA support: one UART with full modem interface; oneUART with IrDA interface; three USARTs support UART synchronous mode and asmart card interface conforming to ISO7816 specification
    • Up to two C_CAN 2.0B controllers with one channel each. Use of C_CAN controllerexcludes operation of all other peripherals connected to the same bus bridge
    • Two SSP controllers with FIFO and multi-protocol support. Both SSPs with DMAsupport
    • One Fast-mode Plus I²C-bus interface with monitor mode and with open-drain I/Opins conforming to the full I²C-bus specification. Supports data rates of up to1 Mbit/s
    • One standard I²C-bus interface with monitor mode and standard I/O pins
    • Two I²S interfaces with DMA support, each with one input and one output
  • Digital peripherals
    • External Memory Controller (EMC) supporting external SRAM, ROM, NOR flash,and SDRAM devices
    • LCD controller with DMA support and a programmable display resolution of up to1024H x 768V. Supports monochrome and color STN panels and TFT color panels;supports 1/2/4/8 bpp Color Look-Up Table (CLUT) and 16/24-bit direct pixelmapping
    • SD/MMC card interface
    • Eight-channel General-Purpose DMA controller can access all memories on theAHB and all DMA-capable AHB slaves
    • Up to 164 General-Purpose Input/Output (GPIO) pins with configurablepull-up/pull-down resistors
    • GPIO registers are located on the AHB for fast access. GPIO ports have DMAsupport
    • Up to eight GPIO pins can be selected from all GPIO pins as edge and levelsensitive interrupt sources
    • Two GPIO group interrupt modules enable an interrupt based on a programmablepattern of input states of a group of GPIO pins
    • Four general-purpose timer/counters with capture and match capabilities
    • One motor control PWM for three-phase motor control
    • One Quadrature Encoder Interface (QEI)
    • Repetitive Interrupt timer (RI timer)
    • Windowed watchdog timer
    • Ultra-low power Real-Time Clock (RTC) on separate power domain with 256 bytesof battery powered backup registers
    • Event recorder with three inputs to record event identification and event time; canbe battery powered
    • Alarm timer; can be battery powered
  • Analog peripherals
    • One 10-bit DAC with DMA support and a data conversion rate of 400 kSamples/s
    • Two 10-bit ADCs with DMA support and a data conversion rate of 400 kSamples/s.Up to eight analog channels total. Each analog input is connected to both ADCs
  • Unique ID for each device
  • Power
    • Single 3.3 V (2.2 V to 3.6 V) power supply with on-chip internal voltage regulator forthe core supply and the RTC power domain
    • RTC power domain can be powered separately by a 3 V battery supply
    • Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deeppower-down
    • Processor wake-up from Sleep mode via wake-up interrupts from variousperipherals
    • Wake-up from Deep-sleep, Power-down, and Deep power-down modes viaexternal interrupts and interrupts generated by battery powered blocks in the RTCpower domain
    • Brownout detect with four separate thresholds for interrupt and forced reset
    • Power-On Reset (POR)
  • Available in LQFP208, LBGA256, LQFP144, and TFBGA100 packages
Target Applications
  • Industrial
  • Consumer
  • White goods
  • RFID readers
  • e-Metering

Applications

LPC18xx

Specifications

  • Core Processor ARM Cortex M3

  • Speed 180MHz

  • Operating Temperature -40℃ ~ 105℃ (TA)

  • Program Memory Type FLASH

  • RAM Size 136K x 8

  • Number of I/O 49

  • Peripherals Brown-out Detect/Reset, DMA, I2S, POR, WDT

  • Mounting Type Surface Mount

  • Oscillator Type Internal

  • Supplier Device Package 100-TFBGA (9x9)

  • EEPROM Size 16K x 8

  • Package / Case 100-TFBGA

  • Core Size 32-Bit

  • Connectivity CANbus, EBI/EMI, Ethernet, I2C, IrDA, Microwire, SD, SPI, SSI, SSP, UART/USART, USB, USB OTG

  • Program Memory Size 512KB (512K x 8)

  • Data Converters A/D 4x10b; D/A 1x10b

  • Voltage - Supply (Vcc/Vdd) 2.2V ~ 3.6V

Popular Products

  • MK60DN256ZVLL10

    Manufacturer: NXP

    IC MCU 32BIT 256KB FLASH 100LQFP

    Product Categories: 32bit MCU

    Lifecycle:

    RoHS:

  • SAK-XC886CM-8FFI 5V AC

    Manufacturer: Infineon

    IC MCU 8BIT 32KB FLASH 48TQFP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • DSPIC33EP512MC206-E/MR

    Manufacturer: Microchip

    IC MCU 16BIT 512KB FLASH 64QFN

    Product Categories: 16bit MCU

    Lifecycle:

    RoHS:

  • 5CSEBA6U19I7NTS

    Manufacturer: Intel

    IC SOC CORTEX-A9 925MHZ 484UBGA

    Product Categories: SOC

    Lifecycle:

    RoHS:

  • PIC16F747T-I/PT

    Manufacturer: Microchip

    IC MCU 8BIT 7KB FLASH 44TQFP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • DSPIC33EP512MC504-E/ML

    Manufacturer: Microchip

    IC MCU 16BIT 512KB FLASH 44QFN

    Product Categories: 16bit MCU

    Lifecycle:

    RoHS:

  • 5CSEMA6U23C6N

    Manufacturer: Intel

    IC SOC CORTEX-A9 925MHZ 672UBGA

    Product Categories: SOC

    Lifecycle:

    RoHS:

  • STM32F769NIH6

    Manufacturer: STMicroelectronics

    IC MCU 32BIT 2MB FLASH 216TFBGA

    Product Categories: 32bit MCU

    Lifecycle:

    RoHS:

  • MB90387SPMT-GS-354E1

    Manufacturer: Cypress

    IC MCU 16BIT 64KB MROM 48LQFP

    Product Categories: 16bit MCU

    Lifecycle:

    RoHS:

Product evaluation

  • Looking forward to your comment

  • Comment

    Verification Code * 

Compare products

Compare Empty