ISO1042QDWVRQ1 Texas Instruments MCU

ISO1042QDWVRQ1 Overview

The ISO1042-Q1 device is a galvanically-isolated controllerarea network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. TheISO1042-Q1 device offers ±70-V DC bus fault protection and ±30-Vcommon-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing muchfaster transfer of payload compared to classic CAN. This device uses a silicon dioxide(SiO2) insulation barrier with a withstand voltage of 5000VRMS and a working voltage of 1060 VRMS.Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT,surge, and emissions compliance. Used in conjunction with isolated power supplies, the deviceprotects against high voltage, and prevents noise currents from the bus from entering the localground. The ISO1042-Q1 device is available for both basic andreinforced isolation (see Reinforced and Basic Isolation Options). TheISO1042-Q1 device supports a wide ambient temperature range of –40°Cto +125°C. The device is available in the SOIC-16 (DW) package and a smaller SOIC-8 (DWV)package.

Features

AEC Q100: Qualified for automotiveapplications
Grade 1: –40°C to 125°Cambient temperature
Meets the ISO 11898-2:2016 physicallayer standard
Supports classic CAN up to 1 Mbps and FD(Flexible Data Rate) up to 5 Mbps
Low loop delay: 152 ns
Protection features
- DC bus fault protection voltage: ±70 V
- HBM ESD tolerance on bus pins: ±16kV
- Driver Dominant Time Out (TXD DTO)
- Undervoltage protection on VCC1 andVCC2
Common-Mode Voltage Range: ±30 V
Ideal passive, high impedance bus terminals when unpowered
High CMTI: 100 kV/μs
VCC1 voltage range: 1.71 V to 5.5 V
- Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface tothe CAN controller
VCC2Voltage Range: 4.5 V to 5.5 V
Robust ElectromagneticCompatibility (EMC)
- System-level ESD, EFT, and surge immunity
- Low emissions
16-SOIC and 8-SOICpackage options
Industrial version available:ISO1042
Safety-relatedcertifications:
- 7071-VPKVIOTM and 1500-VPK VIORM(Reinforced and Basic Options) per DIN VDE V 0884-11:2017-01
- 5000-VRMS Isolation for 1 Minute per UL 1577
- CQC, TUV and CSA certifications