Hello! Welcome to Embedic!
This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
Home > Embedded ICs > 32bit MCU > ATSAMS70J21B-AN
Microchip

ATSAMS70J21B-AN

Pictures are for reference only Please prevail in kind

  • Quantity : *

  • Contact Name : *

  • Email : *

price SUPPLIERS WHOLESALE PRICE TRENDS

Price comparison from authorized distributors

price info ATSAMS70J21B-AN Competitive Prices

EmbedIC has the unique source of supply. We can offer ATSAMS70J21B-AN more competitive price for our customers. You can enjoy our best service by purchasing Microchip ATSAMS70J21B-AN, Please feel free to contact for the best price of ATSAMS70J21B-AN 32bit MCU. Click To Get Quotation

ATSAMS70J21B-AN Overview

The Microchip SAMS70J21 devices are members of a flash microcontrollers family based on the high-performance 32-bit ARM Cortex-M7 processor with Floating Point Unit (FPU). These devices operate at up to 300MHz and feature up to 2048 Kbytes of Flash, up to 384 Kbytes of multi-port SRAM and configurable Instruction and Data Tightly Couple Memories to leverage the advanced DSP capabilities of the core. SAMS70J21 features multiple communication interfaces including a HS USB Host and Device, a HS SDCard/SDIO/MMC interface, USARTs, SPIs and multiple TWIs. Analog features include dual 2Msps 12-bit ADCs with analog front end offering offset and gain error correction, and 2Msps 12-bit DAC.The SAMS70J21 is available in 64-pin QFP and QFN package options.

Note: While there are no plans to change the availabilitystatus of Revision A for this device, new designs should use Revision B for prototypesand production. Supported by MPLAB X IDE and MPLAB Harmony.

ECAD Model

Symbol

ATSAMS70J21B-AN

Footprint

ATSAMS70J21B-AN

Features

    S70 Features

    Core

    • ARM Cortex-M7 running at up to 300 MHz(1)
    • 16 Kbytes of ICache and 16 Kbytes of DCache with Error Code Correction (ECC)
    • Simple- and double-precision HW Floating Point Unit (FPU)
    • Memory Protection Unit (MPU) with 16 zones
    • DSP Instructions, Thumb®-2 Instruction Set
    • Embedded Trace Module (ETM) with instruction trace stream, including Trace Port Interface Unit (TPIU)

    Memories

    • Up to 2048 Kbytes embedded Flash with unique identifier and user signature for user-defined data
    • Up to 384 Kbytes embedded Multi-port SRAM
    • Tightly Coupled Memory (TCM) interface with four configurations (disabled, 2 x 32 Kbytes, 2 x 64 Kbytes, 2 x 128 Kbytes)
    • 16 Kbytes ROM with embedded Boot Loader routines (UART0, USB) and IAP routines
    • 16-bit Static Memory Controller (SMC) with support for SRAM, PSRAM, LCD module, NOR and NAND Flash with on-the-fly scrambling
    • 16-bit SDRAM Controller (SDRAMC) interfacing up to 256 MB and with on-the-fly scrambling

    System

    • Embedded voltage regulator for single-supply operation
    • Power-on-Reset (POR), Brown-out Detector (BOD) and Dual Watchdog for safe operation
    • Quartz or ceramic resonator oscillators: 3 to 20 MHz main oscillator with failure detection, 12 MHz or 16 MHz needed for USB operations. Optional low-power 32.768 kHz for RTC or device clock
    • RTC with Gregorian calendar mode, waveform generation in low-power modes
    • RTC counter calibration circuitry compensates for 32.768 kHz crystal frequency variations
    • 32-bit low-power Real-time Timer (RTT)
    • High-precision 4/8/12 MHz internal RC oscillator with 4 MHz default frequency for device startup. In-application trimming access for frequency adjustment. 8/12 MHz are factory-trimmed.
    • 32.768 kHz crystal oscillator or embedded 32 kHz (typical) RC oscillator as source of low-power mode device clock (SLCK)
    • One 500 MHz PLL for system clock, one 480 MHz PLL for USB high-speed operations
    • Temperature Sensor
    • One dual-port 24-channel central DMA Controller (XDMAC)

    Low-Power Features

    • Low-power Sleep, Wait and Backup modes, with typical power consumption down to 1.1 µA in Backup mode with RTC, RTT and wake-up logic enabled
    • Ultra-low-power RTC and RTT
    • 1 Kbyte of backup RAM (BRAM) with dedicated regulator

    Peripherals

    • USB 2.0 Device/Mini Host High-speed (USBHS) at 480 Mbps, 4-Kbyte FIFO, up to 10 bidirectional endpoints, dedicated DMA
    • 12-bit ITU-R BT. 601/656 Image Sensor Interface (ISI)
    • Three USARTs. USART0/1/2 support LIN mode, ISO7816, IrDA®, RS-485, SPI, Manchester and Modem modes; USART1 supports LON mode.
    • Five 2-wire UARTs with SleepWalking support
    • Three Two-Wire Interfaces (TWIHS) (I2 C-compatible) with SleepWalking support
    • Quad I/O Serial Peripheral Interface (QSPI) interfacing up to 256 MB Flash and with eXecute-In-Place and onthe-fly scrambling
    • Two Serial Peripheral Interfaces (SPI)
    • One Serial Synchronous Controller (SSC) with I2S and TDM support
    • Two Inter-IC Sound Controllers (I2SC)
    • One High-speed Multimedia Card Interface (HSMCI) (SDIO/SD Card/e.MMC)
    • Four Three-Channel 16-bit Timer/Counters (TC) with Capture, Waveform, Compare and PWM modes, constant on time. Quadrature decoder logic and 2-bit Gray Up/Down Counter for stepper motor
    • Two 4-channel 16-bit PWMs with complementary outputs, Dead Time Generator and eight fault inputs per PWM for motor control, two external triggers to manage power factor correction (PFC), DC-DC and lighting control.
    • Two Analog Front-End Controllers (AFEC), each supporting up to 12 channels with differential input mode and programmable gain stage, allowing dual sample-and-hold at up to 2 Msps. Gain and offset error autotest feature.
    • One 2-channel 12-bit 1Msps-per-channel Digital-to-Analog Controller (DAC) with differential and oversampling modes
    • One Analog Comparator (ACC) with flexible input selection, selectable input hysteresis

    Cryptography

    • True Random Number Generator (TRNG)
    • AES: 256-, 192-, 128-bit Key Algorithm, Compliant with FIPS PUB-197 Specifications ̶ Integrity Check Monitor (ICM). Supports Secure Hash Algorithm SHA1, SHA224 and SHA256.

    I/O

    • Up to 114 I/O lines with external interrupt capability (edge- or level-sensitivity), debouncing, glitch filtering and On-die Series Resistor Termination
    • Five Parallel Input/Output Controllers (PIO)

Applications

SAM S70

Specifications

  • Core Processor ARM Cortex M7

  • Speed 300MHz

  • Operating Temperature -40℃ ~ 105℃ (TA)

  • Program Memory Type FLASH

  • RAM Size 384K x 8

  • Number of I/O 44

  • Peripherals Brown-out Detect/Reset, DMA, POR, PWM, WDT

  • Mounting Type Surface Mount

  • Oscillator Type Internal

  • Supplier Device Package 64-LQFP (10x10)

  • Package / Case 64-LQFP

  • Core Size 32-Bit

  • Connectivity I2C, IrDA, LINbus, SPI, UART/USART, USB

  • Program Memory Size 2MB (2M x 8)

  • Data Converters A/D 5x12b; D/A 1x12b

  • Voltage - Supply (Vcc/Vdd) 1.08V ~ 3.6V

Circuit Diagram

Popular Products

  • PIC32MX170F512H-V/PT

    Manufacturer: Microchip

    IC MCU 32BIT 512KB FLASH 64TQFP

    Product Categories: 32bit MCU

    Lifecycle:

    RoHS:

  • LM3S6753-EQC50-A2

    Manufacturer: Texas Instruments

    IC MCU 32BIT 128KB FLASH 100LQFP

    Product Categories: 32bit MCU

    Lifecycle:

    RoHS:

  • PIC12F683-I/SN

    Manufacturer: Microchip

    IC MCU 8BIT 3.5KB FLASH 8SOIC

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • PIC16F1825T-I/SL

    Manufacturer: Microchip

    IC MCU 8BIT 14KB FLASH 14SOIC

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • PIC16F84AT-20I/SO

    Manufacturer: Microchip

    IC MCU 8BIT 1.75KB FLASH 18SOIC

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • PIC10F202T-E/OT

    Manufacturer: Microchip

    IC MCU 8BIT 768B FLASH SOT236

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • R5F102AAASP#V0

    Manufacturer: Renesas

    IC MCU 16BIT 16KB FLASH 30LSSOP

    Product Categories: 16bit MCU

    Lifecycle:

    RoHS:

Product evaluation

  • Looking forward to your comment

  • Comment

    Verification Code * 

Compare products

Compare Empty