ATSAMD10C13A-SSNT Microchip 32bit MCU

ATSAMD10C13A-SSNT Overview

A low-power, high-performance ARM® Cortex®-M0+ based flash microcontroller, the Microchip's ATSAMD10C14 is ideal for a wide range of home automation, consumer, metering and industrial applications. It features:

16KB of flash memory and 4KB of SRAM
Up to 48MHz operating frequency
Two serial communication modules (SERCOM) configurable as UART/USART, SPI or I2C, two 16-bit timer/counters, 32-bit Real-Time Clock and calendar, 12 PWM channels, one 5-channel 12-bit ADC, one 10-bit DAC
Supports 7/12 self-capacitance touch channels in low/high pincount devices
Supports 72 mutual-capacitance touch channels
1.62V to 3.63V power supply
Easy pin migration to SAMD10D devices
Supported by Atmel Studio, ASF and the SAM D10 Xplained Mini kit

Supported by MPLAB X IDE and MPLAB Harmony.

ECAD Model

Symbol

Footprint

Features

Processor

ARM Cortex-M0+ CPU running at up to 48MHz
- Single-cycle hardware multiplier
- Micro Trace Buffer

Memories

8KB in-system self-programmable Flash
4KB SRAM Memory

System

Power-on reset (POR) and brown-out detection (BOD)
Internal and external clock options with 48MHDigital Frequency Locked Loop (DFLL48M) and 48MHto 96MHFractional
Digital Phase Locked Loop (FDPLL96M)
External Interrupt Controller (EIC)
8 external interrupts
One non-maskable interrupt
Two-pin Serial Wire Debug (SWD) programming, test and debugging interface

Low Power

Idle and standby sleep modes
SleepWalking peripherals

Peripherals

6-channel Direct Memory Access Controller (DMAC)
6-channel Event System
Two 16-bit Timer/Counters (TC), configurable as either:
- One 16-bit TC with compare/capture channels
- One 8-bit TC with compare/capture channels
- One 32-bit TC with compare/capture channels, by using two TCs
One 24-bit Timer/Counters for Control (TCC), with extended functions:
- Up to four compare channels with optional complementary output
- Generation of synchronized pulse width modulation (PWM) pattern across port pins
- Deterministic fault protection, fast decay and configurable dead-time between complementary output
- Dithering that increase resolution with up to 5 bit and reduce quantization error
32-bit Real Time Counter (RTC) with clock/calendar function
Watchdog Timer (WDT)
CRC-32 generator
Two Serial Communication Interfaces (SERCOM), each configurable to operate as either:
- USART with full-duplex and single-wire half-duplex configuration
- I2C Bus up to 3.4MHz
- SMBUS/PMBUS
- SPI
- LIN slave
12-bit, 350ksps Analog-to-Digital Converter (ADC) with up to 5 channels
- Differential and single-ended input
- 1/2x to 16x programmable gain stage
- Automatic offset and gain error compensation
- Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
10-bit, 350ksps Digital-to-Analog Converter (DAC)
Two Analog Comparators (AC) with window compare function
Peripheral Touch Controller (PTC)
- Up to 72-channel capacitive touch and proximity sensing