Hello! Welcome to Embedic!
This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.
Home > Embedded ICs > 32bit MCU > ATSAM4LC2CA-CFU
Microchip

ATSAM4LC2CA-CFU

Pictures are for reference only Please prevail in kind

  • Quantity : *

  • Contact Name : *

  • Email : *

price SUPPLIERS WHOLESALE PRICE TRENDS

Price comparison from authorized distributors

price info ATSAM4LC2CA-CFU Competitive Prices

EmbedIC has the unique source of supply. We can offer ATSAM4LC2CA-CFU more competitive price for our customers. You can enjoy our best service by purchasing Microchip ATSAM4LC2CA-CFU, Please feel free to contact for the best price of ATSAM4LC2CA-CFU 32bit MCU. Click To Get Quotation

ATSAM4LC2CA-CFU Overview

A member of the Microchip'sSAM4L family of flash microcontrollers based on the ARM® Cortex®-M4 processor, the ATSAM4LC2C delivers the lowest power in active mode (90uA/MHz) as well as sleep mode (1.5uA) and the shortest wake-up time (down to 1.5us) in a Cortex-M4-based device.

Along with 128KB of embedded flash memory, the device features an LCD controller, hardware cryptography, USB host and device, peripheral event system, SleepWalking intelligent peripherals, and built-in security, including 128-bit Advanced Encryption Standard (AES).

Integrated Microchip QTouch technology makes it easy to bring capacitive touch functionality to your hardware.

Features

    Microcontroller Features

    Core

    • ARM Cortex-M4 running at up to 48 MHz

    • Memory Protection Unit (MPU)

    • DSP Instructions, Thumb®-2 instruction set

    Memories

    • 128 Kbytes embedded Flash, 0 wait-state capability up to 24MHz

    • 32 Kbytes embedded SRAM

    System

    • Embedded voltage regulator for single-supply operation

    • Two Power-on-Reset and Two Brown-out Detectors (BOD)

    • Quartz or ceramic resonator oscillators: 0.6 to 30MHz main power with Failure Detection and low power 32.768 kHz for RTC or device clock

    • High-precision 8/12 MHz factory-trimmed internal RC oscillator

    • Slow clock internal RC oscillator as permanent low-power mode device clock

    • High speed 80MHz internal RC oscillator

    • Low power 32kHz internal RC oscillator

    • PLL up to 240MHz for device clock and for USB

    • Digital Frequency Locked Loop (DFLL) with wide input range

    • Up to 16 peripheral DMA (PDCA) channels

    picoPower® Technology for Ultra-low Power Consumption

    • Active mode down to 90μA/MHz with configurable voltage scaling

    • High performance and efficiency: 28 coremark/mA

    • Wait mode down to 3μA with fast wake-up time (<1.5μs) supporting SleepWalking

    • Full RAM and Logic Retention mode down to 1.5μA with fast wake-up time (<1.5μs)

    • Ultra low power Backup mode with/without RTC down to 1.5/0.9μA

    Package

    • 100-lead LQFP, 14 x 14 mm, pitch 0.5 mm

    • 100-lead VFBGA, 7x7 mm, pitch 0.65 mm

    Temperature operating range

    • Industrial (-40° C to +85° C)

    Peripheral Features

    • USB 2.0 Device and Embedded Host: 12 Mbps, up to 8 bidirectional Endpoints and Multi-packet Ping-pong Mode. On-Chip Transceiver

    • One USART with ISO7816, IrDA®, RS-485, SPI, Manchester and LIN Mode

    • Three USART with SPI Mode

    • One PicoUART for extended UART wake-up capabilities in all sleep modes

    • Liquid Crystal Display (LCD) Module with Capacity up to 40 Segments and up to 4 Common Terminals

    • Windowed Watchdog Timer (WDT)

    • Asynchronous Timer (AST) with Real-time Clock Capability, Counter or Calendar Mode Supported

    • Frequency Meter (FREQM) for Accurate Measuring of Clock Frequency

    • Six 16-bit Timer/Counter (TC) Channels with capture, waveform, compare and PWM mode

    • One Master/Slave Serial Peripheral Interface (SPI) with Chip Select Signals

    • Four Master and Two Slave Two-wire Interfaces (TWI), up to 3.4Mbit/s I2C-compatible

    • Capacitive Touch Module (CATB) supporting up to 32 buttons

    • Inter-IC Sound (IISC) Controller, Compliant with Inter-IC Sound (I2S) Specification

    • Peripheral Event System for Direct Peripheral to Peripheral Communication

    • Parallel Capture Module (PARC)

    • Glue Logic Controller (GLOC)

    I/O

    • 75 I/O lines with external interrupt capability (edge or level sensitivity), debouncing, glitch filtering and slew-rate control

    • Six High-drive I/O Pins

    Analog Features

    • One 16-channel ADC 300Ksps (ADC) with up to 12 Bits Resolution

    • One DAC 500Ksps (DACC) with up to 10 Bits Resolution

    • Four Analog Comparators (ACIFC) with Optional Window Detection

    • Audio Bitstream DAC (ABDACB) Suitable for Stereo Audio

    Security Features

    • One Advanced Encryption System (AES) with 128-bit key length

    • 32-bit Cyclic Redundancy Check Calculation Unit (CRCCU)

    • Random generator (TRNG)

    Debugger Development Support

    • Serial Wire/JTAG Debug Port(SWJ-DP)

    • Debug access to all memories and registers in the system, including Cortex-M4 register bank when the core is running, halted, or held in reset.

    • Serial Wire Debug Port (SW-DP) and Serial Wire JTAG Debug Port (SWJ-DP) debug access.

    • Flash Patch and Breakpoint (FPB) unit for implementing breakpoints and code patches.

    • Data Watchpoint and Trace (DWT) unit for implementing watchpoints, data tracing, and system profiling.

    • Instrumentation Trace Macrocell (ITM) for support of printf style debugging.

    • IEEE1149.1 JTAG Boundary-scan on all digital pins.

    Integrated Software Libraries and Tools

    • ASF-Atmel software Framework – SAM software development framework

    • Integrated in the Atmel Studio IDE with a graphical user interface or available as standalone for GCC, IAR compilers.

    • DMA support, Interrupt handlers Driver support

    • USB, TCP/IP, Wi-Fi and Bluetooth, Numerous USB classes, DHCP and Wi-Fi encryption Stacks

    • RTOS integration, FreeRTOS is a core component

Applications

SAM4L

Specifications

  • Core Processor ARM Cortex M4

  • Speed 48MHz

  • Operating Temperature -40℃ ~ 85℃ (TA)

  • Program Memory Type FLASH

  • RAM Size 32K x 8

  • Number of I/O 75

  • Peripherals Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT

  • Mounting Type Surface Mount

  • Oscillator Type Internal

  • Supplier Device Package 100-VFBGA (7x7)

  • Package / Case 100-VFBGA

  • Core Size 32-Bit

  • Connectivity I2C, IrDA, LINbus, SPI, UART/USART, USB

  • Program Memory Size 128KB (128K x 8)

  • Data Converters A/D 15x12b; D/A 1x10b

  • Voltage - Supply (Vcc/Vdd) 1.68V ~ 3.6V

Popular Products

  • UPD78F0534AFC-AA1-A

    Manufacturer: Renesas

    IC MCU 8BIT 48KB FLASH 64LGA

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • UPD78F0534AGB-GAH-AX

    Manufacturer: Renesas

    IC MCU 8BIT 48KB FLASH 64LQFP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • PIC24FJ192GA106-E/MR

    Manufacturer: Microchip

    IC MCU 16BIT 192KB FLASH 64QFN

    Product Categories: 16bit MCU

    Lifecycle:

    RoHS:

  • UPD78F0535AGC-GAL-AX

    Manufacturer: Renesas

    IC MCU 8BIT 60KB FLASH 64LQFP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • XC2331D20F66LRAAKXUMA1

    Manufacturer: Infineon

    IC MCU 32BIT 160KB FLASH 64LQFP

    Product Categories: 32bit MCU

    Lifecycle:

    RoHS:

  • PIC18F46J50-I/PT

    Manufacturer: Microchip

    IC MCU 8BIT 64KB FLASH 44TQFP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • PIC32MX250F128B-I/SS

    Manufacturer: Microchip

    IC MCU 32BIT 128KB FLASH 28SSOP

    Product Categories: 32bit MCU

    Lifecycle:

    RoHS:

  • EFM8SB10F8G-A-CSP16R

    Manufacturer: Silicon Labs

    IC MCU 8BIT 8KB FLASH 16CSP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

  • ATMEGA164PV-10AU

    Manufacturer: Microchip

    IC MCU 8BIT 16KB FLASH 44TQFP

    Product Categories: 8bit MCU

    Lifecycle:

    RoHS:

Product evaluation

  • Looking forward to your comment

  • Comment

    Verification Code * 

Compare products

Compare Empty